Products » Hub dynamos » for Trikes

Hub Dynamos for Trikes

Trikes are exotic vehicles, larger than standard bikes, but super comfortable. So a hub dynamo is a must on a trike – for lighting, but also for more options while cycling your trike.

SON offers suitable hub dynamos for all common trike brands. Each of them has has their own axle design. Not only do they have different axle lenghts, but they differ in rotor position and the way they mount to the frame, too.

made in Tübingen
5 years guarantee

SON XS-M for HP Velotechnik

For slotted axle mount, that works as cable exit, too

Weight: 530 g

Axle end: Ø 12 x 42 mm (from collar)

Rotor position from collar: 5 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for ICE Trike

Weight: 530 g

Axle end: Ø 12 x 54 mm (from bearing)

Rotor position from collar: 5 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for Anthrotech

Weight: 530 g

Axle end: Ø 12 x 40 mm (from collar)

Rotor position from collar: 7 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for Steintrike

Weight: 530 g

Axle end: Ø 12 x 54 mm (from collar)

Rotor position from collar: 5 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for Catrike

Adapter set Part No. 75219 required

Weight: 530 g

Axle end: Ø 20 x 37.4 mm (from collar)

Rotor position from collar: 15,4 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for KMX

Weight: 530 g

Axle end: Ø 12.7 x 46 mm (from collar)

Rotor position from collar: 5 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″, conforms to German legal regulations

SON XS-M for Christiania Cargo Bike

Weight: 530 g

Axle end: Ø 12 x 69 mm (from collar)

Rotor position from collar: 16 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

SON XS-M for Aidoo Trailer

For slotted axle mount, that works as cable exit, too

Weight: 530 g

Axle end: Ø 12 x 13.6 mm (from collar)

Rotor position from collar: 11,4 mm

6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations

Connector for SON XS-M

  • Male connector SON XS-M 72100
    Female connector SON XS-M 72101
    RRP in D 6,00 €

Cable splitter for SON XS-M

  • 72616
    RRP in D 24,00 €

Set of Adapters

for SON XS-M Catrike

  • 75219
    RRP in D 20,00 €

Wiring Accessories

  • Optimized Generator

    The claw-pole generator has its coil in the centre. Sheet metal parts are made with elaborate workmanship. Thus unrivalled low no-load lossses are achieved.

  • Pressure Compensation System

    Best possible protection against water ingress is realised by the unique pressure compensation system.

  • High-Quality Bearings

    SON hubs are long-life and maintenance-free due to high-end bearings sealed on both sides from SKF.

  • Precise Spoke Holes

    Precise spoke holes with large countersinks are a must for loadable wheels. This is why it will be sufficient to true the wheel only once.

  • Reliable Wiring

    As connections robust 4.8 mm spade connectors are used. They make a safe connection, when professionally crimped onto SON coaxial cable.