Edelux II DC for Pedelecs

The Edelux II DC is approved for direct current supply by drive systems of pedelecs (up to 25 km / h). It must NOT be connected to alternating current (hub dynamos). There are differing models for the more popular systems.

made in Germany
5 years guarantee

Edelux II DC for 6 Volts w/o cable

  • For connection to systems with switched 6 volts output with their special cable. Not suitable for very low current limiting (Bosch Classic)
  • w/o cable, w/o switch and w/o rear light output
w/o cable 680002
polished
RRP in D 139,00 €
w/o cable 680092
silver anodized
RRP in D 139,00 €
w/o cable 680012
black anodized
RRP in D 139,00 €

For 5.5 to 8 volts direct current

Power input: ca. 600 mA

Brightness up to 80 lux

Conforms with German legal regulations / ISO 6742

Weight: 65 g

Edelux II DC for 6 Volts with cable

  • For connection to systems with switched 6 volts output with SON coaxialial cable. Not suitable for very low current limiting (Bosch Classic)
  • with 140 cm coaxial cable
  • w/o switch, w/o rear light output
140 cm cable 681402
polished
RRP in D 139,00 €
140 cm cable 681492
silver anodized
RRP in D 139,00 €
140 cm cable 681412
black anodized
RRP in D 139,00 €

For 5.5 to 8 volts direct current

Power input: ca. 600 mA

Brightness up to 80 lux

Conforms with German legal regulations / ISO 6742

Weight: 65 g (without cable)

Edelux II DC for 6 to 75 Volts with cable

  • For connection to systems with switched 6 to 75 volts and 6 volt systems with low current limiting (Bosch Classic)
  • with 140 cm coaxial cable
  • with switch and with 6 volt rear light output for normal dynamo rear lights
140 cm cable 681403
polished
RRP in D 149,00 €
140 cm cable 681493
silver anodized
RRP in D 149,00 €
140 cm cable 681413
black anodized
RRP in D 149,00 €

For 6 to 75 volts direct current

Power consumption at 5,8 – 6,4 volts: 2 – 2,5 watt (60 to 70 lux)

Power consumption at 6,5 – 75 volts: ca. 3 watt (90 lux)

Conforms with German legal regulations / ISO 6742

Weight: 65 g (without cable)

  • 100% Aluminium Housing

    The aluminium housing ensures good cooling and is extremely robust.

  • Optimised Cooling

    The high-power LED is soldered onto a copper heatsink which is directly seated at the aluminium housing: optimum thermal conduction guaranteed.

  • Anti-Reflective Glass

    A new anti-reflective glass lens already allows more light to pass through compared to a plastic lens. No problems due to ageing or scratches either.

  • SON Coaxial Cable

    Good looks and extremely robust: the 2-pole PU-coaxial cable (2 x 0.5 mm²), custom-made for SON.

  • Bright Standlight

    Vital on a dynamo-powered light: a standlight, that enables sight in the nearfield as well.

  • Magnetic Switch

    The switch that operates an internal reed contact, allows a hermetically tight housing and it is easy-to-use nevertheless.

  • Potted Electronics

    Epoxy potting seals the housing and protects the electronics against moisture and shocks.